The Best Holster Setup for the Sig P365X Macro

The short answer: for most people, the best everyday setup for the Sig P365X Macro is an IWB (inside-the-waistband) Kydex holster molded for the Macro, worn appendix or strong side on a stiff gun belt, with a ModWing Claw to tuck the grip in. If you run a weapon light, choose a holster built for your exact light. Add an OWB holster for range days and training.

Why the P365X Macro needs its own holster

The P365X Macro is longer and taller than a standard P365, so a holster made for another P365 model won't fit it correctly. A holster molded for the Macro holds it securely, releases it cleanly and fully covers the trigger guard. When you order, choose P365X Macro in the Firearm Model step of our Sig Sauer IWB holster. The same holster also fits the P365 X-Macro Comp.

Running a red dot? Every Armor Of God holster comes pre-cut for optics, so your red dot rides clear with no special order.

A P365X Macro IWB holster in Red Hex.

Step 1: Choose IWB or OWB

IWB is the go-to for everyday concealed carry. The Macro's slim width makes it comfortable inside the waistband, and your shirt covers the grip. We recommend adding the ModWing Claw for the cleanest concealment. OWB rides outside your belt for maximum comfort and a fast draw, and works well for the range, classes, open carry or under a jacket. New to the difference? Read our guide: IWB vs. OWB: Which Concealed Carry Holster Is Right for You?

Step 2: Decide on a weapon light

A holster has to be built for the exact gun and light combination you carry. For the P365X Macro, we build light-bearing holsters for:

• Streamlight TLR7 Sub
• Olight Baldr S

A light helps you identify what's in front of you in low light. It also adds size, so expect a slightly bigger footprint to conceal. If you don't run a light, choose the standard P365X Macro holster for the slimmest setup. Light-bearing or not, the holster is pre-cut for your red dot.

A light-bearing P365X Macro holster built for the Streamlight TLR7 Sub.

Step 3: Pick your clip (IWB)

• Quick Clip 1.5 or 1.75 inch: the standard, all-plastic clip. It needs a belt, so match it to your belt width.
• Monoblock Clip: a metal clip with teeth at the tip. Wear it over a belt or without one. The best of both worlds.
• UltiClip: latches onto your clothing for the most secure hold without a belt. If you wear a belt, it goes right over the clip.

More detail in our guide: How to Choose a Holster Clip. For OWB, choose a Paddle for quick on and off, a Paddle with cant options to adjust your draw angle, or Tech-Lock for a more secure, adjustable fit.

Step 4: Add concealment upgrades

• ModWing Claw: uses your belt to rotate the grip toward your body so the Macro prints less. Especially useful for appendix carry, and our top recommendation for this pistol.
• Threaded Barrel Clearance: extra room at the muzzle if you run a threaded barrel.
• Carbon Fiber Upgrade: turns any color or design into a carbon fiber finish.

Step 5: Choose your color or design

Pick from more than 120 colors, camo patterns, faith and flag designs and specialty prints, or request your own custom design. We send a proof for your approval before we build. See real P365X Macro builds on our P365X Macro holsters page and more in our gallery.

Prefer a different P365? We also build for the P365XL, P365, P365X AXG, P365X Legion and P365 Fuse.

Step 6: Don't skip the belt

A dress belt bends under the weight of a loaded P365X Macro, so the holster sags and shifts. A purpose-built gun belt keeps everything tight and in place all day. Our KORE gun belts are micro-adjustable, so you can fine-tune the fit.

Our recommended P365X Macro setups

Every setup above is pre-cut for a red dot optic.

Safety first

A holster is not a safety device and doesn't replace training. Confirm your firearm is unloaded before fitting or practicing with a new holster, make sure the trigger guard is fully covered, and keep clothing and drawstrings clear when you reholster. Practice with an unloaded firearm until your draw and reholster are second nature, and know your local carry laws. Read our full Product Safety & Liability guidance.

Build your P365X Macro holster

Every Armor Of God holster is handcrafted to order in St. Johns, Florida, molded for your exact firearm, pre-cut for red dot optics, and ships within 5 business days (custom designs 7 to 10). Carry it for 30 days. If you're not satisfied for any reason, return it for a full refund of the item price under our 30-Day Carry Guarantee. Custom designs are final sale, and every holster has a lifetime warranty on workmanship.

• Build a P365X Macro IWB holster
• Build a P365X Macro IWB holster for the TLR7 Sub
• Build a P365X Macro OWB holster

Questions about your setup? Read our Holster FAQ or ask us.