®
Foundation of your carry
KORE Gun Belts
Pick your material, color and buckle. Every KORE belt is built to carry a loaded holster all day without sagging.
1Material
2Color
3Buckle
Cut-to-fit: remove the buckle, trim the strap to your size, and reattach. Hex wrench included.
How to size your KORE belt
- Find your pant size using the ruler markings on the back of the belt strap.
- Add 4" for OWB carry or 6" for IWB carry, and mark that spot. Example: 34" pants = cut at 38" (OWB) or 40" (IWB).
- Remove the buckle and trim. Loosen the 2 set screws on the back of the buckle with the included hex wrench, slide the strap out, and cut at your mark with sharp scissors.
- Reattach the buckle. Insert the cut end fully, clamp the teeth down firmly, then gently tighten the set screws until flush. Don't over-tighten.
- Check the fit. Snugged up, the tip should reach about 3" past your first belt loop.
Tip: try the belt on before cutting, and trim a little at a time if you're unsure. KORE's official sizing guide
- Dialed-in fitA 10" hidden track with 40+ size positions adjusts in ¼" increments.
- No sagThe reinforced Power-Core™ center carries your firearm and gear without sagging.
- All-day comfortStiff where it counts, flexible enough to sit, walk and move in all day.
Complete your carry
Built to carry an AOG holster
Every AOG holster is handcrafted to order for your firearm. Pair it with a KORE belt for a rock-solid everyday carry.